Editing Snubable P-06 Cadaver Stabilization Capsule (section)

== Design ==

The P-06 capsule consisted of an insulated refrigeration cabinet fitted around a sealed stainless-steel inner tray. The tray held the body after chemical stabilization with [[SPF-2006 Aldehyde Stabilization Fluid]]. The chamber used rubber sealing gaskets, metal locking clamps, condensation drainage, and a separate electrical line connected to the storage room.

A small external control panel regulated the refrigeration system. The chamber was built for steady low-temperature storage of chemically fixed remains. The internal tray could be removed for inspection, but the main cabinet remained locked inside the Snubable room.

The capsule was not a standard medical unit. It was assembled by Peter from refrigeration parts, laboratory storage equipment, and workshop-made steel fittings available through early Snubable channels.