Editing Ferdischreiter (section)

== Design ==
The Ferdischreiter used a 0.8-litre one-cylinder air-cooled engine with an estimated output of approximately 6 horsepower, equal to about 4.5 kilowatts. The engine was a slow-running type made for steady pulling work. Its main strength was simple movement at low speed, with the power delivered through a basic exposed belt system. A heavy lead flywheel was mounted on the right side of the tractor. The flywheel helped keep the engine turning evenly between power strokes and was also used to start the machine. To start it, the driver stood beside the tractor and spun the flywheel by hand until the engine caught and began running.

Power moved through a belt between the engine and the flywheel assembly. The belt sat exposed on the right side of the tractor and was one of the main parts that had to be watched during use. The tractor had one forward gear and reached a top speed of about 15 kilometres per hour. Its speed depended on engine speed, the fixed gearing, and the load behind it.

The Ferdischreiter weighed 1,959 kilograms. Much of the weight came from the steel frame, engine block, lead flywheel, front axle assembly, and rear running gear. This gave the tractor enough mass to pull small trailers and work over uneven farm ground without feeling too light at the wheels.

The driver sat behind a simple steering control placed in front of the seat. The steering worked through a geared mechanism. The driver pushed the control forwards and backwards to move the steering linkage. This gave the tractor a direct, hands-on feel, and the movement of the steering parts could be seen while driving. A small battery was fitted to power one small light on the tractor, giving basic visibility around yards, barns, and work areas in low light.